Thursday 20 December 2012

Borri UPS for home use

Around a week ago my APC Smart UPS SC420 decided its battery needed replacing (again!). I only seem to get around 2-3 years out of mine which started me thinking, why on earth do I get such short life from something 'relatively' expensive. These units come in at around £120 and batteries around half that. For 420va that doesn't seem too great, as all I do is power 2 machines (desktops with a few add-ons) and a network switch/wifi. Mainly to protect the computers from nasty spikes and unexpected shutdowns more than running without power (since the internet router is in the house, not connected to a UPS).

However, I wanted to replace the UPS to keep the protection up, mainly as the power in my area seems to spike and brownout quite a bit and I've had a lot of things go pop as a result of this (X10 kit hates this kind of choppy power, hence most of my X10 home control stuff going bang). So I duly went to APC and looked up the replacement battery. It came out at around £50 after postage, etc. So I then looked at the APC upgrade wizard, see what they would offer me for a trade-in, as I particularly like the idea of trading in old hardware to get new for a bit of discount and I feel I've done the environment some good with them having batteries inside, etc. For trade-in I was disappointed. I could get a replacement unit for around £100, thats with the same 420va limitation, which since I run that at around 80-90% load isn't great (and I suspect why I go through batteries so often). So looking at the next up capacity 450va, this was £151 for really very little difference, or the 550va model for around the same price. Not very impressive.

So I started doing my usual answer to everything, google for recommendations or alternative brands, Borri kept coming up as they appear to do all sorts of UPS and generator equipment from SOHO right up to datacentres, etc, and looking quite promising I looked at the B60 range. These started at 800va and went up to 2000va, and shopping around for prices. I was pleasantly surprised, the B60-800va version would be £71 delivered, etc. So thats approximately double the rating for a nice £71.

The next issue before ordering, was it linux compatible? For years I've used APC units and used the ever popular opensource APCUPSD to shut down servers when batteries neared depletion, etc. Firstly Borri provided a download of linux software. An excellent start. Checking the software it wasn't what I'd hoped, it was a java-based server/applet that basically talked to the ups over USB and presented output via a flash-based web-ui on a custom java-tomcat url on your machine. OK, not the end of the world. I did more digging and thought of NUT for linux. This looked to support it, so worth giving it a go.

UPS arrived next day and it's quite a nice looking unit, really clear permanently lit LCD on the front telling you input volts, output volts and current status (Battery level in bars, current load level). I plugged it into my laptop to play around with and get an idea of the java tomcat web interface. It actually was quite neat, just a pity it was flash and didn't seem to have a raw data port/method of extracting data from it otherwise I'd have stuck with it.

Installing NUT and setting it up for the Borri wasn't too bad, it's partially supported according to NUT using the blazer_usb driver, but this doesn't give you battery level/capacity and time to depletion. No real issue, I can survive!

I've yet to add my load of machines to it and see how it copes, but so far its looking pretty good. If I figure out the battery level/capacity part of it I'll be very happy with this solution.


No comments:

Post a Comment

Note: only a member of this blog may post a comment.